48V-52V POE POE Switch 8/16 Ports 10/1000Mbps IEEE 802.3 Af/at Over Ethernet IP Camera Wireless AP CCTV Camera Security System

Notice: It is 48V Standard POE Switch with EXTEND mode, but if you change to that mode -- max Network Cable length up to 250 meters, we use 52V Power Adapter on this PoE Switch to avoid camera not-working on such long distance. It is very suitable to work with 52V if your IP Camera Parameter is ''12V/POE'' Product Description * This is a 48V standard POE switch, designed and developed independently by SSC ASECAM to meet the needs of network power supply. * It adopts the latest high-speed Ethernet switching chip, ultra-high backplane bandwidth design, and has extremely fast data processing capabilities to improve smooth data transmission performance ,With 8 power supply network ports, 2 RJ45/uplink ports. Among them, all RJ45 ports support network cable power supply. Product Features * All Port: The transmission rate of 1-8 Fast Ethernet port is 10/1000Mbps (12+, 36-) and 2 uplink 10/1000Mbps transmission rate Fast Ethernet port. * Security: Independent port and function of current protection * CableType: 3 types and more than 3 types of twisted pair for 10BaseT(No support for power supply); 5types and more than5 types of twisted pair for 100Base-TX\1000Base-TX. Software Specification * Switch Capacity: 2.0G * Exchange mode: store-and-forward * Rate of data signalling: 1-8 port 10/1000Mbps and 2 UPlink port 10/1000Mbps（Half-duplex mode) * Standards compliance: IEEE802.3AF/AT MAC address space: 8K Working Environment Mechanical Dimension : 191mm (L)×141mm(W) ×44mm(H) Input Power: AC220-AC240 V / 120W Ambient temperature: Operating Temperature 0℃ to 40℃ / Storage Temperature -40℃ to 70℃ 8Port Parameter 8*10/100Mbps RJ45 port（support POE+） 2*10/100/1000Mbps RJ45 uplink port The whole power is 120W，each port max. power supply reached 30W Support 250m long distance transmission, Standard Switching Mode, VLAN, The POE port supports the priority mechanism. POE Switch is designed and developed by our company. It can meet the demand of POE. It uses the latest high-speed Ethernet switching chip, has ultra-high backplane bandwidth design, and has extremely fast data processing capability and smooth data transmission performance. It has 8*RJ45 port，2*RJ45 uplink port. Each port max. power supply reached 30W, the whole power is 120W. It can automatically detect and identify PD device that meet the IEEE 802.3af/at, support the priority mechanism. Excellent port performance Supply 8*10/100Mpbs RJ45 self-adaption, high-speed forwarding and non-packet loss RJ45 port. Supply 2*10/100Mpbs RJ45 uplink port. All ports supported by MDI/MDIX auto flip and self-negotiation. Support IEEE802.3X Full-duplex and backpressure for half-duplex mode. Excellent POE power supply performance 8*10/100Mpbs RJ45 port support POE+，meets the requirements for security monitoring, teleconference system, and wireless coverage. Detect the PD devices automatically and supply the power without damaging non-POE devices. Two modes of operation Normal Mode ----All ports communicate freely，suitable for common data transmission environment. Long distance transmission mode--- Support 250m long distance transmission，suitable for long distance transmission. 16Port Parameter 16*10/100Mbps RJ45 port（support POE+） 2*10/100/1000Mbps RJ45 uplink port The whole power is 250W，each port max. power supply reached 30W Support 250m long distance transmission, Standard Switching Mode, VLAN, The POE port supports the priority mechanism. Hi-F1620GBL-A POE Switch is designed and developed by our company. It can meet the demand of POE. It uses the latest high-speed Ethernet switching chip, has ultra-high backplane bandwidth design, and has extremely fast data processing capability and smooth data transmission performance. It has 16* RJ45 port，2*RJ45 1000Mbps uplink port. Each port max. power supply reached 30W, the whole power is 250W. It can automatically detect and identify PD device that meet the IEEE 802.3af/at, support the priority mechanism. Supply 16*10/100Mpbs RJ45 self-adaption, high-speed forwarding and non-packet loss RJ45 port. Supply 2*10/100/1000Mpbs RJ45 uplink port. All ports supported by MDI/MDIX auto flip and self-negotiation. Support IEEE802.3X Full-duplex and backpressure for half-duplex mode. 16* 10/100Mpbs RJ45 port support POE+，meets the requirements for security monitoring, teleconference system, and wireless coverage. Detect the PD devices automatically and supply the power without damaging non-POE devices. Two modes of operation Normal Mode ----All ports communicate freely，suitable for common data transmission environment. Long distance transmission mode--- Support 250m long distance transmission，suitable for long distance transmission. Package included: 1. 4CH/8CH PoE switch x1 2. AC Power Cable x1 3. User Manual x1 4. Toolkit x1